First public release v2.0 November, 2002 - First release v.1.0 in May, 2002 Redesign of GUI, analysis steps, complex events - Implementation Phase 1 2001-2002 Multitask-Multithread, GUI system with Qt, Basic [...] requires at least ROOT 6.24 and Qt 5 Release v6.2 April 27th, 2022 Consolidation and bugfixes Release v6.1 May 12th, 2021 Build system may use cmake; Support of Qt6 (experimental)) Release v6.0 October 21st [...] versions Release v5.2 January 9th, 2017 GUI user command buttons, consolidation and bugfixes Release v5.1 March 17th, 2016 Python scripting in analysis and GUI terminals Release v5.0 June 25th, 2015 Support

prototyping FAIR components in an operating environment. References [1] FAIR Baseline Technical Report-APPA, Vol. 3b, (2006), pg. 1/PANDA, http://www.fair-center.de/fileadmin/fair/publications_FAIR/FAIR_BTR_5 [...] maximum magnetic rigidity of 10 Tm) CRYRING (experimental storage ring, maximum magnetic rigidity of 1.4 Tm) HITRAP (trapping and low energy beam facility for highly charge ions at the ESR) Recent Developments [...] Storage Ring (HESR) , which was primarily designed for experiments with stored and cooled anti-protons [1], turned out to be a well-suited facility which can accommodate a range of SPARC experiments with h

Post address: Dr. Holger Brand - RBEE GSI Helmholtzzentrum für Schwerionenforschung GmbH Planckstr.1 D-64291 Darmstadt GERMANY

An overview of isotopes that have been investigated at SHIP within the last decade is given in fig. 1. Present techniques allow for detailed nuclear structure investigations up to isotopes with production [...] are in progress or considered in next future will pin down the cross section limit to approximately 1 pb. Then, nuclear structure investigations of superheavy element up to Z = 118 will be in reach. Highlights

commissioned in the ESR [F. Nolden et al., Nucl. Instr. Meth. A 659 (2011) 69] (see right part of Figure 1). In addition to highly enhanced time resolution essential for decay studies, this highly-sensitive [...] accurate measurements of the longitudinal momentum transfer in a reaction (see left part of Figure 1). Novel experiments are being now considered which use the latter property of the new detector. These [...] After the very successful measurements with the new resonant Schottky detector (see left part of Figure 1), a new detector is being developed, namely a Schottky detector which would be capable to access also

07.2016 8:4 Bunch Merging on Intermediate Flattop in SIS18 28.06.2016 Handover from Cavity BE4 to BE1 During Acceleration in SIS18 11.06.2016 Damping of Longitudinal Quadrupole Qscillations during acceleration [...] Verification of Phase and Amplitude Calibration 21.11.2012 Phase Calibration & Verification by 4:2:1 Bunch Merging in SIS18 30.03.-31.03.2012 Testing the Data Supply Control System with Bunch Merging in [...] and Open Loop Damping of Longitudinal Quadrupole Oscillations in SIS12/18 19.-20.12.200 Messungen zum 1-und 2-Kavitätenbetrieb: Gezielte Anregung von Quadrupolschwingungen ( German ) 16.-17.08.2006 Measurements

Documents: User Manual: The Exploder and Trigger Module. Trigger Module (EXPLODER3A and EXPLODER2A_DB1) connector reference

boards as platform for receiving data via SFP with the GOSIP protocol: PEXOR3 (Lattice FPGA), KINPEX1 (Xilinx Kintex) . TRIXOR TRIXOR is the MBS trigger module that is closely attached to PEXOR or KINPEX

dargestellt. Die Bewegung von bis zu vier verschiedenen Sorten, die durch ihr Masse-Ladungs-Verhältnis (m/q)1...4 charakterisiert sind, ist zu erkennen. Bei der Schottky- Massenspektrometrie (links) werden Ionen

er module] GTBC4 [GTB based CAMAC crate controller] GTBLWL2 [GTB fibre optic cable interface] GTBOI1 [GTB Optical Isolator] GTBSR [General purpose GTB slave module] PCIGTB3 [GTB master as PCI card] SAM5